Sears Kenmore

Pre-Filter Installation Instructions

Refer to your owner's manual for additional instructions and safety guidelines.
  1. Turn the air cleaner OFF and unplug from the wall outlet.

  2. Place fingers on front release tabs, and gently push tabs in and pull front grille forward to remove it.

  3. Remove and replace the indicated filter. Install the new pre-filter by placing it on the tabs. DO NOT try to wash and reuse pre-filter.

  4. Place bottom tabs on front grille into slots on base of air purifier. Push top of grille forward until grille locks into place.

  5. Push the "Reset" button to turn off light(s) and reset time.

  6. Plug air cleaner into a power outlet and it is ready for operation.

  7. Filter change out should be more frequent with excessive smoke, dust and pet hair.

  8. Replace filter every 2 to 3 months for optimum performance.

Close this window.