Industrial Air Filters

High Efficiency Extended Surface Accumulair Rigid Cell Filter

Accumulair Rigid Cell rigid filters are designed to provide consistent high efficiency filtration in variable air volume systems and turbulent air. Deep pleats are held firmly in place with plastic separators and extended metal backing. Every edge of the media pack is glued inside the periphery of the frame to prevent air and dust bypass.

The media and separators are 100% polypropylene to resist moisture damage, microbial growth, and puncture damage. Heavy gauge galvanized enclosure frame resists corrosion and maintains its structural integrity for extended months of service. Accumulair Rigid Cell's are excellent replacement filters for ASHRAE style metal separator filters and for mini pleat V cells. When indoor air quality or protection of processes is critical, Accumulair Rigid Cell rigid filters provide high efficiency, even in difficult operating conditions. Designed for variable velocity and turbulent air, Accumulair Rigid Cells can be used in existing and new air handler installations. The following features make the Accumulair Rigid Cell the premier rigid filter on the market.

• Available in 6" and 12"
• 26 ga. Corrosion resistant galvanized metal frame
• Available in box style or single header
• Available in synthetic or glass media
• Ultra-low resistance to air flow
• Injection molded plastic pleat stabilizers
• Expanded metal media support
• Available filter efficiencies: 40-45%, 60-65%, 80-85%, and 90-95%
• MERV 9, MERV 11, MERV 13, and MERV 14 (per ASHRAE 52.2)
• Rated Class 2 under UL900 standard

Contruction:
Accumulair Rigid filters are constructed of synthetic or glass media that offers low resistance to air flow and excellent dust holding capacity, which are laminated to an expanded metal backing. Precise pleat spacing is achieved by utilizing molded plastic pleat stabilizers located on the upstream and downstream side of the media pack. The pack is bonded to the inside casing of a 26 gauge metal frame and sealed to prevent contaminated air bypass. Metal diagonal support braces are attached to the air-entering and air-exiting sides of the frame to strengthen the enclosure and enhance overall durability. Accumulair Rigid filters are available in standard box-style or single header frame construction.

Application:
Accumulair Rigid filters are commonly used in industrial and commercial facilities such as: hospitals, manufacturing plants, schools, office buildings and government agencies. Accumulair Rigid filters can be installed in existing filter systems such as side access or built-up bank systems where space will allow 6" or 12" filter depths.

High Efficiency Accumulair Multi-Pocket Bag Filters

Filters-Now filters are the most economical solution for high efficiency air filtration. We offer ASHRAE efficiencies 45%, 65%, 85% and 95% in four standard face dimensions and six standard pocket lengths up to 36". We also offer Bag Filters with Oil Mist collection media. This allows maximum flexibility to tailor per application. Non-standard sizes are also available. Superior performance results from using the highest quality materials available:

• 26 ga. Corrosion resistant galvanized metal frame
• Tribo-Electric synthetic media
• High dust loading capacity
• Ultra low resistance to air flow
• 100% Ultrasonically sealed
• Gasket and pocket loop options available
• Available filter efficiencies: 40-45%, 60-65%, 80-85% and 90-95% (per ASHRAE 52.1)
• MERV 9, MERV 11, MERV 13, MERV 14, MERV 16 (per ASHRAE 52.2)
• Rated Class 2 under UL900 standard
• UL900 Class 1 available

Construction:
Accumulair Bag filters are constructed of a unique and proprietary blend and process method of fiber structure. The Tribo-Electric media consists of four different layers of non-woven media to create an advance gradient structure. It's advanced gradient design allows for high dust loading capacity and better flow of air at a low resistance. All Accumulair bag filters are 100% ultrasonically sealed to provide air tight and high bursting strength pockets. High strength spun bond non-woven spacers are continuously welded inside the pockets to mitigate over inflation. The ultrasonically sealed pockets are positioned around pocket support frames (J-channels) and secured by metal V strips to ensure product integrity under all operating conditions. Enclosed in a 26 gauge galvanized steel frame, the filters are individually packaged in a poly bag.

Application:
Accumulair Bag filters are commonly used in industrial or commercial facilities such as: hospitals, manufacturing plants, schools, office buildings and government agencies. Accumulair Bag filters can be installed in existing filter systems such as side access or built-up bank systems.

High Capacity Pleated Inserts and Bulk Roll Media

• Pleated Inserts - are made with the same media used in our MERV 8, MERV 11, and Odor Block™ Pleated Panel Filters.
• These medias are laminated - to a hot dipped galvanized expanded metal and then pleated for increase surface area.
• Pleated Inserts - fit into metal holding frames which stay in their filter housing; only the pleated insert is replaced saving cost and disposal space.
• 50 Pleated Inserts - fit in the same size shipping container as 12 pleated panel filters.

High Capacity Odor Block™ Carbon Media Pads and Rolls

• Odor Block™ pad and roll media - are simple, low cost alternative for fume and odor control.
• This is the same - carbon impregnated media used in our Odor Block™ Pleated Filters.
• 3.5 ounces - per square yard with 150% add-on carbon. That's 10.44 grams of finely powered carbon per square foot.
• Fine carbon - provides millions of crevices to quickly absorb odor molecules. This carbon powder is very evenly distributed throughout the lofted polyester media which assures a better capture percentage on the first pass.
• Odor Block™ media - is only 1/4" thick and fits easily into holding frames and tracks.

High Durability Polyester Media Pads and Rolls

Filters-Now Polyester Medias are offered in an array of fiber blends, tackifiers, and binders to meet specific HVAC and Paint Filtration needs. We cut to size in pads for holding frames or rolls for "hook and roll" installation.

• 1" Paint Arrestor Media - We blend very large fibers on the air entry side of the media with small fibers on the air exit side. This gradient density affords excellent paint loading and efficiency for long service life, minimal pressure drop and protection of the surrounding environment and equipment.
• 2" Tackified Media - We blend course fibers on the air entry side of the media with very fine fibers on the air exit side. This provides a "roughing" layer for high efficiency. A non-migrating tackifier is applied to the air exit side to prevent dust from shaking loose.
• 1" and 1/2" Tackified Media - We blend small and medium size fibers with a non-migrating tackifier applied to the exit side. These medias work well in typical HVAC dust applications.
• 1/2" Dry Media - It is made from a blend of small and medium size fibers and is an economical solution to many light dust loading applications.

High Efficiency Polyester Ring Panel and Link Filters

• Series 153 1" - Series 153 is MERV 8 2-Ply 1" 100% 6/15 graduated density denier blend. A dry open web is on the air entering side serving as a 1st stage pre-filter catching larger particles. Smaller particles are caught by the 2nd ply of finer denier fibers.
  This filter is designed for use in commercial and industrial applications requiring higher level of performance. Also used extensively in paint booths and in typical HVAC applications and as a pre-filter to high efficiency filters. The Series 153 Ring Panels and Links provide economical answers for the medium efficiency filtration problems of today.
• Heavy gauge galvanized internal support wire - 8 Gauge galvanized internal wire support frame with 2 cross bars.
• Construction - Heat sealed construction and thermally bonded on each side of the internal support and completely around the perimeter of the frame ring.
• Center seal pattern - holds the polyester layers together to prevent sagging and fluttering.
• Rating - Flammability is rated Class 2
  
  [Order-NOW Series 153 Dry Tackifier 2Ply Link Panel 1 Inch Filters]
  [Order-NOW Series 153 Dry Tackifier 2Ply Panel 1 Inch Filters]
  
  
• Series 154 1-1/2" - Series 154 is MERV 8 3-Ply 6/15/40 denier synthetic premium grade media. A dry open web is on the air entering side serving as a 1st stage pre-filter catching larger particles. Smaller particles are caught by the 2nd ply of finer denier fibers, which is treated with a non-migrating encapsulating tackifier on the inner layer ensures positive dust holding capacity. Dry tightly woven exiting layer encloses tackifier and prevents any bypass or fiber break off.
  This filter is designed for use in commercial and industrial applications requiring higher level of performance. Also used extensively in paint booths and in typical HVAC applications and as a pre-filter to high efficiency filters. The Series 154 Ring Panels and Links are treated with an aggressive tackifier which is sticky to the touch but will not transfer to hands, clothing or coils.
• Heavy gauge galvanized internal support wire - 8 Gauge galvanized internal wire support frame with 2 cross bars.
• Construction - Heat sealed construction and thermally bonded on each side of the internal support and completely around the perimeter of the frame ring.
• Center seal pattern - holds the polyester layers together to prevent sagging and fluttering.
• Rating - Flammability is rated Class 2
  
  [Order-NOW Series 154 Tackifier 3Ply Link Panel 1-1/2 Inch Filters]
  
  
• 1" 3 Ply Panels - Constructed of a blend of three different fiber deniers in two polyester layers sealed around an internal support wire. Media layers are graduated density - the air entering layer is 1" tackified poly and has larger, more open fibers for good dust loading, plus an anti-microbial agent. The air exit layer is 1/2" needled poly with smaller, tighter woven fibers for high efficiency.
• Heavy gauge galvanized internal support wire assures stability under high air velocity and heavy dirt loading. Media overlap around all edges provides an air-tight seal to prevent dust bypass.
• Center seal pattern holds the polyester layers together to prevent sagging and fluttering. A non-migrating tackifier applied to the back of the air entering side of each panel acts as a final layer of defense by trapping and holding dust.
  
  [Order-NOW 3Ply Ring Panel 1 Inch Filters]
  
  
• 2" 4 Ply panels - Constructed of a blend of four different fiber deniers in two polyester layers sealed around an internal support wire. Media layers are graduated density - the air entering layer is 1-1/2" tackified poly and has larger, more open fibers for good dust loading. The air exit layer is 1/2" needled poly with smaller, tighter woven fibers for high efficiency.
• Heavy gauge galvanized internal support wire assures stability under high air velocity and heavy dirt loading. Media overlap around all edges provides an air-tight seal to prevent dust bypass.
• Center seal pattern holds the polyester layers together to prevent sagging and fluttering. A non-migrating tackifier applied to the downstream side of each panel acts as a final layer of defense by trapping and holding dust.
  
  [Order-NOW 4Ply Ring Panel 2 Inch Filters]
  
  
• 1" 3 Ply Ring Links - Constructed of a blend of three different fiber deniers in two polyester layers sealed around an internal support wire. Media layers are graduated density - the air entering layer is 1" tackified poly and has larger, more open fibers for good dust loading, plus an anti-microbial agent. The air exit layer is 1/2" needled poly with smaller, tighter woven fibers for high efficiency.
• Heavy gauge galvanized internal support wire assures stability under high air velocity and heavy dirt loading. Media overlap around all edges provides an air-tight seal to prevent dust bypass.
• Center seal pattern holds the polyester layers together to prevent sagging and fluttering. A non-migrating tackifier applied to the back of the air entering side of each panel acts as a final layer of defense by trapping and holding dust.
  
  [Order-NOW 3Ply 1" Ring Link Filters]
  
  
• 2" 4 Ply Ring Links - Constructed of a blend of four different fiber deniers in two polyester layers sealed around an internal support wire. Media layers are graduated density - the air entering layer is 1-1/2" tackified poly and has larger, more open fibers for good dust loading. The air exit layer is 1/2" needled poly with smaller, tighter woven fibers for high efficiency.
• Heavy gauge galvanized internal support wire assures stability under high air velocity and heavy dirt loading. Media overlap around all edges provides an air-tight seal to prevent dust bypass.
• Center seal pattern holds the polyester layers together to prevent sagging and fluttering. A non-migrating tackifier applied to the downstream side of each panel acts as a final layer of defense by trapping and holding dust.
  
  [Order-NOW 4Ply 2" Ring Link Filters]

High Efficiency Polyester Cube Pocket Filters

• Cube Filters - offer up to five times the filter area of flat panels.
• One, Two, and Three Pocket - configurations in any media or combination of medias.
• Filters-NOW's Polyester Media - is the best way to maximize the service, life, and efficiency.
• Self sealing - support from two heavy gauge wires withstands warping from heavy loading and "aggressive" installation.
• Polyester Overlap - around the edges inhibits dust and paint bypass.

High Proficiency Paint Overspray System

• CRS 319 System - is specifically designed to help aircraft manufacturing and rework facilities comply with tightening environmental emissions standards.
• Two and Three Stage - are the choice for low airflow resistance, long service life and minimal maintenance and disposal costs.
• CRS 319 has been Tested - at independent laboratories according to EPA Proposed Testing Method 319.
  [View Test Results]
  
• Final Stage - is the compliance stage and has been tested as a stand alone which allows flexibility and customization for each application and paint type.
• Three Stage - system is intended for paint booths that were installed after these tightening standards were instituted.
• Two Stage - system is intended for paint booths that are "grandfathered" in before these standards were developed.

• Auto Booth Air Make-Up - are intake filters that are made to fit aftermarket automotive paint booths. These filters incorporate a scrim baked media to prevent blowout at high airflow and heavy loading.